Titanium turnbuckle set – 6 pcs (Traxxas Rustler 2wd – all versions)

Back to: Option Parts for Traxxas vehicles

Manufacturer:

Part No: L2629

£33.99

Description

This is a 4mm Titanium Turnbuckle upgrade kit that greatly increases turnbuckle strength. This kit is especially designed for those that currently have plastic links, are using older generation 3mm diameter turnbuckles, or for those that want a stronger option than Chinese steal. All camber and steering turnbuckles have been upgraded to 4mm. If you are upgrading from plastic links or 3mm links you will need the Traxxas rod ends listed below. We include the fasteners where needed.

Kit Features:

- 4/5mm nut for easy turnbuckle adjustment.

- Increased strength and reduction in weight compared to plastic and/or steel links.

- Converts lower end models or older models to fully adjustable 4mm turnbuckles.

- All necessary fasteners included for the conversion. (Rod ends are not included for those that are upgrading from plastic links or 3mm diameter tie rods. Rod ends needed are noted below).

The Lunsford Turnbuckle Touch:
- Grade 5 Titanium is roughly a 45% weight savings over steel.
- Anti-corrosion properties are greater than stainless steel.
- Nano accurate thread rolling process
- A very smooth, zero tolerance and bur free threading process aids in the preservation of the parts you are threading into.
- Machined from Made in the USA center-less ground titanium.
- From raw material to the finished product, all of our Grade 5 titanium born and bred in the USA.
- Designed, developed and crafted right here in Albany, Oregon USA at the Lunsford compound.
- All Lunsford Titanium Turnbuckles come with a 100% Guarantee!

- In the rare instance your turnbuckle bends or breaks, Lunsford will replace it for free.

What's Included:
1 - 3mm x 38mm PUNISHER Titanium Turnbuckle (Servo). For use with TRAXXAS rod end TRA2742
2 - 4mm x 40mm Titanium Turnbuckles (Front Camber) For use with TRAXXAS rod end TRA5525
2 - 4mm x 50mm Titanium Turnbuckles (Rear Camber) For use with TRAXXAS rod end TRA5525
2 - 4mm x 60mm Titanium Turnbuckles (Steering). For use with TRAXXAS rod end TRA5347
4 - 3mm x 16mm Phillips Head Screws. For use when upgrading from plastic links. (inner steering/inner front camber link)
8 - 3mm x 20mm Phillips Head Screws. For use when upgrading from plastic links. (outer steering/outer front camber link, rear camber link)
6 - 3mm Zinc Nyloc Nuts. For use when upgrading from plastic links. (steering links, outer front camber link)

Titanium turnbuckle set – 6 pcs (Traxxas Rustler 2wd – all versions)

Contact Us

Office Hours