Machined 7075 alloy rear suspension hanger for the B5M. Designed to allow the standard low roll center position or our optional high roll center (HRC) by utilizing the included 1mm shim set.

Ajust the roll center by placing the rectangle shim on top of the hanger for standard LRC or below the hanger for optional HRC. HRC can give you more on power traction, free up the rear at mid corner and creates less cvd bone plunge.

Polished and anodized in your choice of factory blue or black (hanger only).

NOTE- the lower corners of the stock rear tower will need to be trimmed by about 1mm to clear the new hanger.

REQUIERES- Associated B5M rear suspension inserts.